PAS24 – Micro Motion Sensor

This micro motion sensor supports two channels to control lightings as well as another 0 volt contact device at same time, equipped with high sensitive design to detect slight motion within a radius of 3 meters around the sensor. It will keep the connected lighting fixture and/or another connected appliance continuously on when you are seated to make slight body movement.

– 360° micro motion detectable
– Two relays (2 channels)
– Ceiling flush mount design (EU inlet box)
– Photo sensor built in for smart control
– Run-on time adjustable
– Ambient lux. setting adjustable
– Up to 1000W loading for fluorescent (channel one)
– Up to 5A load for 0 volt contact (channel two)

– Power Requirement: AC 220 – 240V / 50Hz
– Lighting Load (Max.): Incandescent 2000W, Fluorescent 480W (channel 1) 5A (channel 2)
– Detection Coverage: 360° (horizontal), up to 12M(dia.) at 20°C
– Mounting Height: Recommended 3m – 3.5m on ceiling Mount
– Time Adjustment: 5 sec – 12 min
– Lux Adjustment: 20 – 300 Lux
– Warm Up Time: less than 60 seconds
– Working Temperature: -10°C – 40°C
– Protection Class: Class II
– Protection Degree: IP20
– Safety: CE