The temperature & humidity detector is a Z-Wave enabled device which is fully compatible with any Z-Wave enabled network. Inclusion of this detector on other manufacturer’s wireless controller menu allows remote operation of connected modules when this detector is triggered.
The temperature & humidity detector is designed to monitor the current temperature and humidity of ambient environment. The reading of temperature & humidity can be reported to you on a regular base at your disposal.
If temperature & humidity reaches set points, the detector will send alerts to associated devices for further execution. Since sudden temperature & humidity change may cause health problems to people such as elderly or very young children, this detector provides you most up-to-date temperature and humidity readings to watch over your family’s health.
– LCD display for measurements & status
– Temperature range: -10°C – 50°C ± 2°C
– Humidity range: 20% – 90% RH ± 15% RH
– Built-in 60dB beep tone
– Battery: 3 x 1.5V Alkaline / AA
– Freq: 868.42 MHz / 869 MHz / 908.42 MHz