PAS31
Surface & embedded mount occupancy detector
Previous slide
Next slide
360º micro motion
The sensor has a wide range of detection 360º, with 6m wide for micro detection.
Time/lux setup
Set the minimum light required for activation and set a timer when lights will be always off.
Smart relay
Activates lights only when is needed, let you greatly reduce the energy consumption.
2 types of mounting
User can choose to install surface mount or embedded.
Specifications
Power requirement
200~240VAC 50Hz
Loading (channel 1)
2000W for incandescent
1500W for fluorescent
2000W for halogen
300W for LED
Detection angle
360º
Detection range
Φ = 5m for micro motion
Φ = 10m for walk across motion
Dimensions (mm)
46 (H) * 105 (D)
Run-on time setting
5sec ~ 30min
Ambient light setting
10 ~ 1500 Lux
Warm-up time
About 1 minute
Isolation protection
Class II
Water proof
IP44 (Surface mount)
IP20 (Embedded mount)
Working temp.
-10 ~ 45 ºC
Power consumption
1.3W maximum
Detection area
360º Detection
10m Max detection
Download
Regulations
